DS820-Φ8 인치 정밀 다이싱 소우
DS820--Precision Dicing Saw
Φ8 " Classic Model
Stable Performance, High Cost Performance
DS820 Precision Dicing Saw is equipped with 15" LCD touch screen, with friendly GUI interface, easy and convenient for the workpiece alignment; it adopts DS-300 software control system, with reasonable framework, easy for operation, and the production efficiency is increased; it has the advantages of stable equipment performance, high reliability and low maintenance cost.
제품 매개 변수
DS820--Precision Dicing Saw
Φ8 " Classic Model
Stable Performance, High Cost Performance
DS820 Precision Dicing Saw is equipped with 15" LCD touch screen, with friendly GUI interface, easy and convenient for the workpiece alignment; it adopts DS-300 software control system, with reasonable framework, easy for operation, and the production efficiency is increased; it has the advantages of stable equipment performance, high reliability and low maintenance cost.
Characteristics:
Blade database management
Workpiece database management
Automatic focusing function
Two-way blade cutting function
Blade exposure quantity compensation function
Multiple safety guarantee and warning functions
Application Fields:
Optics and optoelectronics, communication, audion, IC, LED, NTC, photo voltaic, medical equipment, scintillation crystal
Materials Suitable for the Precision Cutting:
Blue glass, silicon wafer, gallium arsenide, lithium niobate, aluminum oxide, ceramic, quartz, sapphire, crystal, PCB board
Multichip Cutting Function
For multiple square materials to be processed, after their positions are respectively registered into the system, the alignment and cutting for the multiple materials to be processed can be realized.
Technical Parameters of DS820
Configuration and performance | Workpiece size | φ200mm or □180mm |
Cutting groove depth | ≤4mm or customized | |
Chuck flatness | ±0.005mm/100mm | |
Alignment system | 70xdirect light+oblique light (210xoptional) | |
Spindle | Revolution speed range | 10000~50000rpm |
Output power | 1.5kW | |
X axis | Drive mode | Servo motor |
cutting range | 380mm | |
index resolution | 0.001mm | |
Speed setting range | 0.1~400mm/s | |
Y axis | Drive mode | Step motor + closed-loop system |
cutting range | 210mm | |
index resolution | 0.0005mm | |
stroke positioning accuracy | ≤0.003mm/5mm | |
Whole-stroke positioning accuracy | ≤0.005mm/210mm | |
Z axis | Drive mode | Step motor |
stroke | 30mm | |
index resolution | 0.001mm | |
Repeating accuracy | 0.001mm | |
θ axis | Drive mode | DD motor |
Rotating angle range | 380° | |
Rotating angle resolution | 0.0005° | |
Basic specification | Power supply | Single phase, AC 220V±10%, 3.0kVA |
Power consumption | During processing, 0.6kW | |
During warming up, 0.4kW | ||
Compressed air | Pressure: 0.5~0.6Mpa; maximum consumption: 180L/min | |
Cutting water | Pressure: 0.2~0.3Mpa; maximum consumption: 3.0L/min | |
Cooling water | Pressure: 0.2~0.3Mpa; maximum consumption: 1.5L/min | |
Exhaust air rate | 2.0m3/min (ANR) | |
Machine dimensions W×D×H | 775mm×960mm×1650mm | |
Weight | 600kg |
Usage Conditions:
1. Please set the machine in the environment of 20~25℃ (The fluctuation range should be kept within ±1℃); the indoor humidity should be 40%~60%, keeping constant, without condensation.
2. Please use the clean compressed air with the atmospheric pressure dew point below -15℃, 0.1ppm residual oil, and filtration rating above 0.01um/99.5.
3. Please keep the temperature of the cutting water 2℃ above the room temperature (The fluctuation range should be within ±1℃), and the temperature of the cooling water should be the same with the room temperature (The fluctuation range should be kept within ±1℃).
4. Please protect the equipment from the heavy impact or any external vibration threat. Moreover, please do not install the equipment near the air blower, ventilation opening, or the equipment generating high temperature or greasy dirt.
5. Please install this equipment in the place with the waterproof floor and with the drainage treatment.
6. Please strictly follow our instruction to operate.
회사의 장점
Technical advantages
Self-owned intellectual property control software with complete functions; Advanced precision control technology and quality control system; Domestic leading image recognition technology (positioning, blade mark, edge finding); Dicing machine proprietary technology deep research (NCS, BBD); Rich application process research and accumulation.
Cost advantage
Large shipments ensure that our company has great advantages in procurement costs; Every year, the company invests a lot of manpower and resources in R&D and innovation in the field of dicing machines, and has obtained many patents.
Delivery advantage
The company has production capacity of more than 50 units per month, stocking in advance, shortening the delivery period to strive for business opportunities for customers; High consistency of equipments, strict control and capacity guarantee
Service advantages
The company has 4 product sales and service centers in Chengdu, Suzhou, Dongguan and Xiamen, providing technical support to customers in real time, covering most of the country. Provide timely and accurate answers within 12 hours when receiving after-sales service requirements from customers, and arrive at the customer's site within 48 hours when necessary...