DS830-Φ8 인치 정밀 다이싱 소우
DS830--Precision Dicing Saw
Φ8" Function Model
Better Configuration, Customizable
DS830 Precision Dicing Saw is equipped with the imported 1.5kw high rotation speed spindle; with θ-axis DD motor for drive, improved rotating angle accuracy, improved rotating angle resolution and chuck-table flatness; the power distribution system is upgraded, and multiple functions can be selectively equipped based on the customer requirements.
제품 매개 변수
DS830--Precision Dicing Saw
Φ8" Function Model
Better Configuration, Customizable
DS830 Precision Dicing Saw is equipped with the imported 1.5kw high rotation speed spindle; with θ-axis DD motor for drive, improved rotating angle accuracy, improved rotating angle resolution and chuck-table flatness; the power distribution system is upgraded, and multiple functions can be selectively equipped based on the customer requirements.
Characteristics:
Standardly equipped with the image identification and automatic alignment function
Standardly equipped with the non-contact sensor (NCS) function
Selectively equipped with the blade broken detector (BBD) function
Selectively equipped with the kerf check function
Customized module available based on the customer requirements
Improved automation degree
Application Fields:
Optical optoelectronics, communication, triode, IC, LED, NTC, photovoltaic, medical equipment, scintillation crystal
Precision cutting materials:
Blue glass, silicon wafer, gallium arsenide, lithium niobate, aluminum oxide, ceramic, quartz, sapphire, crystal, PCB board
Knife mark detection function
The image system can automatically detect the position, width, chipping, and eccentricity of the cutting tool marks, and performs baseline correction and cutting position correction to improve the cutting quality
Technical Parameters of DS830
Configuration and performance | Workpiece size | φ200mm or □180mm |
Cutting groove depth | ≤4mm or customized | |
Chuck flatness | ±0.005mm/150mm | |
Alignment system | 70x Direct light+ Ring light (210xOptional) | |
Spindle | Revolution speed range | 10000~50000rpm |
Output power | 1.5kW (2.4kW Optional) | |
X axis | Drive mode | servo motor |
cutting range | 380mm | |
index resolution | 0.001mm | |
Speed setting range | 0.1~500mm/s | |
Y axis | Drive mode | Stepper motor + grating closed-loop control system |
cutting range | 210mm | |
index resolution | 0.0005mm | |
stroke positioning accuracy | ≤0.003mm/5mm | |
Whole-stroke positioning accuracy | ≤0.005mm/210mm | |
Z axis | Drive mode | Stepper motor |
stroke | 30mm | |
index resolution | 0.001mm | |
Repeating accuracy | 0.001mm | |
θ axis | Drive mode | DD motor |
Rotating angle range | 380° | |
Rotating angle resolution | 0.0002° | |
Basic specification | Power supply | Single phase,AC 220V±10%,3.0kVA |
Power consumption | During processing, 0.6kW | |
During warming up, 0.4kW | ||
Compressed air | Pressure 0.5~0.6Mpa;maximum consumption 220L/min | |
Cutting water | Pressure 0.2~0.3Mpa;maximum consumption 3.5L/min | |
Cooling water | Pressure 0.2~0.3Mpa;maximum consumption 1.5L/min | |
Exhaust air rate | 2.0m3/min (ANR) | |
Machine dimensions W×D×H | 775mm×960mm×1650mm | |
Weight | 600kg |
Usage Conditions:
1. Please set the machine in the environment of 20~25℃ (The fluctuation range should be kept within ±1℃). The indoor humidity should be kept 40%~60%, keeping constant, without condensation.
2. Please use the clean compressed air with the atmospheric pressure dew point below -15℃, 0.1ppm residual oil, and filtration rating above 0.01um/99.5.
3. Please keep the temperature of the cutting water 2℃ above the room temperature (The fluctuation range should be within ±1℃), and the temperature of the cooling water should be the same with the room temperature (The fluctuation range should be kept within ±1℃).
4. Please protect the equipment from the heavy impact or any external vibration threat. Moreover, please do not install the equipment near the air blower, ventilation opening, or the equipment generating high temperature or greasy dirt.
5. Please install this equipment in the place with the waterproof floor and with the drainage treatment.
6. Please strictly follow our instruction to operate.
회사의 장점
Technical advantages
Self-owned intellectual property control software with complete functions; Advanced precision control technology and quality control system; Domestic leading image recognition technology (positioning, blade mark, edge finding); Dicing machine proprietary technology deep research (NCS, BBD); Rich application process research and accumulation.
Cost advantage
Large shipments ensure that our company has great advantages in procurement costs; Every year, the company invests a lot of manpower and resources in R&D and innovation in the field of dicing machines, and has obtained many patents.
Delivery advantage
The company has production capacity of more than 50 units per month, stocking in advance, shortening the delivery period to strive for business opportunities for customers; High consistency of equipments, strict control and capacity guarantee
Service advantages
The company has 4 product sales and service centers in Chengdu, Suzhou, Dongguan and Xiamen, providing technical support to customers in real time, covering most of the country. Provide timely and accurate answers within 12 hours when receiving after-sales service requirements from customers, and arrive at the customer's site within 48 hours when necessary...